9/25/2023 0 Comments Set up airport expressWith subnet mask 255.255.255.252, the subnet has only four possible addreses. With bridge on, the AirPort Extreme should be essentially invisible, so its IP addresses don't mean much. ** By the way, "MAC" here stands for Media Access Control and has nothing to do with "Mac", the informal name for a Macintosh computer, which should not be all caps. ![]() Since you mentioned getting "one device at a time" (so not just the one Mac that was working before), you probably have been through this before if it will be necessary for your ISP's systems. This may be as simple as resetting the modem or powering it off and on, or it may be require contacting technical or customer support. Router Mode: DHCP and NAT (NAT is key to attaching multiple devices without involving your ISP)ĭHCP Range, DHCP Reservations, and the rest as you see fitĪfter you update your AirPort Extreme to apply those settings, you may have to interact with your ISP or its hardware to get it to accept the router's MAC** address. Router Address: (as supplied by your ISP probably the "gateway number" you mention) Subnet Mask: (should also be supplied by your ISP) (I'm assuming AirPort Utility 6.1 here other releases have the settings arranged slightly differently.) You'll want to set your AirPort Extreme along the following lines. ![]() I don't know if or where that might still be the case.) ![]() (There have been ISPs who have wanted to charge extra for multiple attached devices, even behind a home router. This should be a perfect application for an AirPort Extreme, assuming your ISP isn't intentionally interfering with it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |